| 0100-2051 | 5 Micron Filter 316 SS and PTFE 5PK |
| 0100-2138 | Ferrule One Piece Fused Silica Adapter |
| 0100-2323 | Polymide Liner for 250 um columns |
| 0100-2583 | Gas connector for Dilution gas port 1/pk |
| 0100-2594 | Fitting-internal Reducer 1/16 to 1/32-in |
| 0100-2703 | Gas connector, dilution gas port, 7900 |
| 0101-0633 | 1/16" Micrometering Valve |
| 0101-0636 | Liquid sampling 0.2ul, 1000psi |
| 0101-0637 | Liquid sampling 0.5ul, 1000psi |
| 0101-0638 | Liquid sampling 1.0ul, 1000 psi |
| 01010-80002 | Hydrolic fluid, 100ml |
| 01018-21207 | Inlet cap |
| 01018-22707 | PTFE Frits 5PK |
| 01018-23702 | Insert tool |
| 01018-60025 | Solvent inlet filter, stainless steel |
| 01018-60027 | Support Ring Wash Assembly |
| 01018-67305 | Capillary 0.25x700mm 2 1/16 in male ftgs |
| 01018-68722 | Seal wash kit |
| 01040-87602 | Capillary, 880mm |
| 01048-87302 | Inlet capillary, 80 cm, 0.17 mm id |
| 01078-87302 | Capillary, 100uL loop |
| 01078-87305 | Capillary 0.17mm id 80cm male fit |
| 01078-87306 | Flex capillary, 0.25 x 700 mm |
| 01080-68702 | Isocratic and gradient test sample |
| 01080-68704 | Isocratic standard, 0.5ml ampoule |
| 01090-60008 | Solvent inlet filter |
| 01090-60009 | PTFE tubing and glass frit |
| 01090-68702 | Low disrsion in-line filter,2um frits |
| 01090-68703 | Universal Solvent Filter Kit |
| 01090-87303 | Seat Capillary 0.17 mm id 110 mm |
| 01090-87304 | Cap.flex.tubing, 280mm, 0.17mm id., 1/16 |
| 01090-87305 | Cap.tubing w/fittings, 1/16 to 1/16in M. |
| 01090-87308 | Connector 130mm x 0.25mm 1/16in male |
| 01090-87606 | Solvent capillary |
| 01090-87610 | Cap. column bypass, 280 mm, 0.12 mm id. |
| 01090-87611 | Flexible capillaries, 105 mm-long |
| 01100-68700 | Compact Flash Card- G1315C/65C,G3100AA |
| 03394-60540 | .CABLE,GEN PUR REM CONT |
| 03394-60560 | RP-CA,5890A REM STARTSTOP |
| 03394-60600 | REMOTE CABLE,1046/1050 |
| 03396-61010 | 3395B/96C/97A |
| 03396-61020 | Cable, Analog 33595A/96B |
| 410105017 | Tubing, Solenoids to 6-Port, Deactivated |
| 0490-1849 | Position Sensor Switch for Manual Valves |
| 0515-1446 | SCREW-SET M3 X 0.5 3MM-LG PLAIN-CUP-PT ; |
| 0535-1082 | End cap Nut for Nebulizer connection |
| 05890-61090 | 4-Way Solenoid Valve, 115 VAC |
| 05890-61260 | Chemical filter for 5890 GC |
| 05890-61525 | Dual Parking post for autosampler |
| 05921-61090 | Discharge tube kit 5921 AED |
| 05921-80350 | Sctrometer window replacement kit |
| 05970-60045 | GC/MS Check out sample |
| 05971-20134 | Draw out plate |
| 05971-20143 | Lens, Ion focus |
| 05971-40100 | Baseplate/manifold seal for 5971 |
| 05971-60140 | Filament assembly for 5971 |
| 05971-60170 | Reller Assembly for the 5971/72/GCD |
| 05971-60571 | rfluorotributylamine (PFTBA) GC/MS std |
| 05971-80103 | Electron multiplier replacement horn |
| 05980-20018 | PFTBA sample bulb |
| 05988-20066 | Column nut fitting |
| 05990-60075 | Tuning + System rformance Standard |
| 05990-60084 | Filament assembly 2/PK |
| 07673-20570 | Screw for mounting syringe |
| 07673-60840 | 7673A Supplies Kit |
| 07673-61330 | Needle support kit, auto 320/250 |
| 07673-61340 | Needle support kt,auto 320/250 no sepnut |
| 07673-80070 | TOP INSERT |
| 07675-80050 | Valve Tube, 1/16 in., 1/8 in., 520mm |
| 07680-62105 | Ring frit assembly, 7680 SFE |
| 08451-60104 | Standard cell holder assembly for 8453 |
| 0890-1893 | Sleeve for 375u od fused silica tubing |
| 0905-0466 | Seal, 4.743 OD |
| 0905-1159 | O-Ring, Size 2-123, Silicone, Rust Color |
| 0905-1175 | Seal, wash |
| 0905-1189 | O-ring, manifold window |
| 0905-1194 | Piston seal use w/buffered solvents 1pk |
| 0905-1245 | O-Ring KALREZ |
| 0905-1284 | NPD Metal C-ring/Botm |
| 0905-1294 | Metering seal, 900ul 1100/1200 |
| 0905-1420 | -Pump Seal 2/PK |
| 0905-1599 | Piston seal for G2258A Dual loop ALS |
| 0905-1608 | O-Ring, 2-011, rfluoroelastomer, White |
| 0905-1609 | O-Ring,2-002, rfluoroelastomer, White |
| 0905-1610 | O-Ring, 2-010, rfluoroelastomer, White |
| 0905-1700 | Piston seal, 2mm, high rformance ALS |
| 0905-1717 | Metering device Seal 1290 LC Sampler |
| 0905-1718 | Wash seal 1290 Infinity LC, 1/pk |
| 0905-1719 | Pump seal 1290 Infinity LC, 1/PK |
| 0905-1731 | Bio-inert wash seal |
| 0905-2580 | NPD Metal C-Ring/Top |
| 0960-0376 | Gauge tube for measuring vacuum |
| 0960-0799 | ION gauge tube, with KF-25 flange |
| 1000-0488 | Window, quartz |
| 1000-0953 | High Pressure Window |
| 1000-1437 | Sulfur Filter Clear 7890, newer 6890 |
| 1000-1438 | Convex Glass Lens, 31.2mm f.l. |
| 10048100 | Cell holder base Cary 400/500 |
| 10833B-2310 | HP-IB Cable 2m (10833B) |
| 10833G-2310 | HP-IB Cable, 8 meter (10833G) |
| 10834A-2310 | Adpter ext.GP-IB(10834A) |
| 110026900 | Cylindrical cell holder, ambient, 1/pk. |
| 110059900 | Long pathlength rect cell holder, 1/pk |
| 110260190 | Rectangular cell holder Cary UV, 1/pk |
| 110291290 | Tee piece syringe PSD 95, 1/pk |
| 110351790 | Mark VI spray chmbr, w/o nebulizer, 1/pk |
| 110351990 | Nebulizer bung, Mark VI, w/o neb., 1/pk |
| 110374300 | Assembly cable extension accessory, 1/p |
| 110374900 | Powder cell holder for reflectance accy |
| 110375990 | VGA cell support for MarkVI burner. 1/pk |
| 110380500 | Long extn lead, Temrature Probe, 1/pk |
| 110381100 | Short extn lead, Temrature Probe, 1/pk |
| 110421700 | Neutral Density filter 0.3 A uncertified |
| 110423800 | Drain bung polyprop, Sturman-Masters s/c |
| 110427100 | Rear rack extension SPS-5 a/sampler, 1/p |
| 110589600 | Mounting bkt, cycl s/c Liberty ICP, 1/pk |
| 110592400 | Assy cable, no. Vankel dissol accy,1/p |
| 110593000 | Drain bung Ertalyte, Sturman-Masters s/c |
| 110593190 | ICP spray chamber, Sturman-Masters. 1/pk |
| 110611700 | Mounting brkt, cyclone s/c on radial ICP |
| 110628090 | Flame shield with viewing window, 1/pk |
| 110634490 | AA spray chamber, Mark 7 complete, 1/pk |
| 110637000 | Mixing paddle, fluorinated, Mark 7, 1/pk |
| 110645090 | Cell holder for Cary 50/60. 1/pk |
| 110648190 | Cell base for Cary 50/60. 1/pk |
| 110654990 | VGA-77 cell support Mark 7 Burner, 1/pk |
| 110665200 | Mounting brkt, cyclone s/c on axial ICP |
| 110756390 | Assy tee piece syringe PSD 120, 1/pk |
| 110805200 | FT-IR source lamp assy, mid-IR, 1/pk |
| 110866890 | AA s/chamber Organic, MK7 complete 1 /pk |
| 110868000 | Mounting brackt,MSIS on axial+radial ICP |
| 1222200803 | SCREW, 8-32 X 3/16 SSPH |
| 1300502506 | Tube, probe to 6-port valve,deactivated |
| 1300530001 | Tube, vent deactivated |
| 1300530010 | Tube, Tee to Pressure PCA |
| 1460-1160 | Spring Compression for FPD |
| 1460-2571 | Canted coil spring |
| 14-8911-003 | Dry Flow Moisture Trap, Gas Filter |
| 1499822800 | WASHER, BLU 0.317 |
| 1500334701 | Detector Crunch Washer, 25 pack |
| 15-0285-016 | Vesl Ferrule for top of trap |
| 1510220200 | Finger nut-cone |
| 1610076400 | Tube drain grey, Mark VI s/chamber, 1/pk |
| 1610085300 | COUPLING INSERT 18IN FLOW |
| 1610085600 | COUPLING INSERT 14IN FLOW |
| 1610089100 | Baffle for Sturman-Masters s/c, polyprop |
| 1610089300 | Outlet bung polyprop Sturman-Masters s/c |
| 1610114500 | S/chamber top, Sturman-Masters, Ertalyte |
| 1610114600 | Baffle for Sturman Masters s/c, Ertalyte |
| 1610114700 | S/chamber base Sturman-Masters, Ertalyte |
| 1610114800 | Outlet bung Ertalyte Sturman-Masters s/c |
| 1610117390 | Venturi for nebulizer, Mark 7, EK 1/pk |
| 1610118800 | BUNG SPRAYCHAMBER FLUORINATED |
| 1610126500 | Fitting, tube,nut+ferrule,1/16in.,10/pk |
| 1610136400 | Neb. EzyFit sample inlet 1.6mm od, 10/pk |
| 1610136500 | Flangeless fitting SVS 1/4-28 P218, 1/pk |
| 1610136600 | Flangeless ferrule SVS 1/16 in tube 1/pk |
| 18596-40015 | Quadrant tray 4/PK |
| 18710-20119 | Jet, Adaptable, packed, 0.47mm ID |
| 18710-60170 | FID/TCD rformance evaluat. sample kit |
| 18711-60060 | Sample, rformance evaluation 3/PK |
| 18713-60040 | ECD sample |
| 18713-60050 | Wi test kit |
| 18740-20880 | Seal, stainless steel |
| 18740-60830 | Septum retainer nut for Headspace |
| 18789-60060 | NPD sample |
| 18789-80070 | Jet, Adapt, wide bore packed, 0.76mm ID |
| 18900-60640 | Sample, alcohols in gasoline |
| 190006404 | Deionizer/deoxygntr cart- wtr chlrs,1/p |
| 190024800 | Orating supplies kit Mark VI s/chamber |
| 190024900 | GTA-110 Deuterium GFAA Supplies Kit |
| 190025000 | GTA-110 Zeeman GFAA supplies kit |
| 190025200 | VGA 77 orating supplies kit |
| 190025400 | SIPS 10/20 orating supplies kit, 1/p |
| 190034100 | Mark 7 Atomization system supplies kit |
| 190045500 | Mercury Analyzer orating supplies kit |
| 190045700 | Capillary inserts, Qtrace GLS, 3/pk |
| 190055900 | Probe tips Versi, 10mm p/length, 2/pk |
| 190064300 | Nebulizer MicroMist 0.2mL/min inc EzyFit |
| 190065200 | Centrifuge tubes polyprop. 50 mL, 500/pk |
| 190065400 | SPS 3 Autosampler Orating Supplies Kit |
| 190067900 | GTA 120 Deuterium GFAA supplies kit |
| 190068000 | Kit GTA 120 Zeeman GFAA Supplies 1/pk |
| 191022700 | CCC STINGER SEAL |
| 19231-20910 | Ignitor castle for FID |
| 19231-20940 | Nut, collector |
| 19231-20950 | Insulator, lower collector |
| 19231-20960 | Collector Body |
| 19231-20970 | Insulator, upr collector |
| 19231-21050 | PTFE chimney, flame ionization detector |
| 19231-21060 | Hasloy FID Igniter Castle |
| 19231-21080 | Col body-Hastalloy |
| 19231-60680 | Ignitor Glow Plug Assembly |
| 19231-60690 | Collector, assembly kit |
| 19231-80520 | Det ins liner 1/8in |
| 19231-80530 | Det ins liner 1/4in |
| 19231-80590 | RP-Replacement trap |
| 19232-60676 | TCD replacement cartridge |
| 19232-80550 | Adapter, weldment |
| 19233-20625 | ECD adapter fused silica liner repl. |
| 19233-20755 | ECD adapter end cap |
| 19233-80565 | RP-ECD make-up gas adapter |
| 19234-60720 | Assembly, nut warmer ins cup |
| 19243-00070 | Cover, Lower Insulation |
| 19243-60500 | Septum nut, nonpurging |
| 19243-60505 | Assembly, Series II Septum Nut |
| 19243-60570 | Septum nut assembly |
| 19243-80510 | Column adapter 1/8" mtl |
| 19243-80520 | Column adapter 1/4" mtl |
| 19243-80550 | Jumr, weldment |
| 19243-80570 | Weldment, PPIP insert |
| 19244-80560 | Jet, Adaptable, capillary, 0.29mm ID |
| 19244-80610 | FID/NPD adapter for capillary column |
| 19244-80620 | Jet, Adapt, high temp capil, 0.47mm ID |
| 19245-20510 | Narrow bore insert |
| 19245-20515 | Insert,COC for 250 um column,6 rings |
| 19245-20525 | COC insert 320um col. 5 silver rings |
| 19245-20580 | Inserts, COC for 530um columns, no rings |
| 19245-20780 | 530u Insert-aluminum clad |
| 19245-40050 | Duck bill 10/PK |
| 19245-60760 | Cool On-Column insert spring |
| 19245-80520 | PCOC septum nut base assembly |
| 19245-80521 | PCOC septum nut base assembly |
| 19246-60550 | Pressure regulator 0-100 psi |
| 19246-60560 | Regulator, 0-15 back pressure |
| 19246-60570 | Backpressure regulator 0-30 psi (100kPa) |
| 19246-60580 | Regulator, 0-60 back pressure |
| 19246-60630 | 0-60 reg/gauge kit |
| 19246-60690 | 0-100 pressure regulator |
| 19251-20620 | Capillary injection rtn nut |
| 19251-60575 | Split/splitless insert weldment w/tubing |
| 19251-80680 | Ferrule install tool |
| 19256-20690 | Collet - Glow Plug |
| 19256-20910 | Filter Spacer, used only w PN 1000-1437 |
| 19256-60590 | Liner/ferrule kit for FPD |
| 19256-60750 | Ignitor - Cleaned w/Copr Gasket |
| 19256-60800 | FPD Ignitor Replacement Kit |
| 19256-80010 | Filter, P 5890 FPD |
| 19256-80030 | Window, first |
| 19256-80045 | Heat Shield Gasket, rfuoroelastomer |
| 19256-80060 | Window, second |
| 19256-80570 | Weldment, cap adapter |
| 19298-60500 | Microb analyzer sample kit |
| 19301-60660 | FID flow measuring insert |
| 19301-80530 | Column, adapter |
| 19302-80020 | Adapter, column |
| 19305-60580 | FPD sample |
| 19320-60656 | 30 PSI gauge kit |
| 19320-80625 | Cooling tower assembly |
| 19325-60660 | Actuator Assembly |
| 19354-60510 | Sample, NI catalist test |
| 19361-60566 | 100 PSI replacement gauge |
| 19362-60510 | Restrictor 0-20 cc/min |
| 19362-60515 | Mass flow cntrlr restrictor 0-20cc/min |
| 19362-60520 | Restrictor 0-60 cc/min |
| 19362-60525 | Mass flow cntrlr restrictor 0-60cc/min |
| 19362-60530 | Restrictor 0-110 cc/min |
| 19362-60535 | Mass flow cntrlr restrictor 0-110cc/min |
| 19362-60545 | Mass flow cntrlr restrictor 0-400cc/min |
| 19362-60555 | Mass flow cntrlr restrictor 0-750cc/min |
| 19362-60565 | Mass flow cntrlr with 20cc/min restrictr |
| 19362-60575 | Mass flow cntrllr, 400ml/min restrictor |
| 19363-60506 | 60 PSI gauge kit |
| 1970-0201 | Photomultiplier, 1046A |
| 200187500 | FID Flame Tip, 0.010 inch |
| 200187600 | Flow Tube Assy 1/8 OD TFE |
| 200193800 | FID Flame Tip With Nut, 0.020 inch |
| 2010069690 | Torch one piece, radial 1.4mm id inject |
| 2010070790 | Torch bonnet, quartz, radial ICP, 1/p |
| 2010072900 | Torch body semi-demount, radial ICP, 1/p |
| 2010076400 | Torch one piece extended, radial ICP 1/p |
| 2010076500 | Concentric glass nebulizer (C-style) 1/p |
| 2010077500 | Quartz injector 0.8 mm Semi-demount 1/pk |
| 2010081200 | Torch one piece, Liberty axial ICP, 1/pk |
| 2010081600 | Concentric glass nebulizer (K-style) 1/p |
| 2010081700 | ICP s/chamber single pass glass cyclonic |
| 2010083400 | Torch body semi-demount, axial ICP, 1/p |
| 2010084200 | Gas-liquid separator, Hg Analyzer, 2/pk |
| 2010090400 | Torch one piece, axial 2.4mm id injector |
| 2010094800 | Torch Hi-solids axial, 2.4mm id injector |
| 2010095000 | Torch Hi-solids radial 1.8mm id injector |
| 2010095200 | Outer tube, quartz, axial torch, 1/pk |
| 2010095300 | Intermediate tube quartz, demount torch |
| 2010095400 | Quartz injector 2.4mm axial torch 1/pk |
| 2010095500 | Outer tube, quartz, radial torch, 1/pk |
| 2010095600 | Quartz injector 1.5mm radial torch 1/pk |
| 2010095900 | Alumina injector 1.8mm Demount torch 1/p |
| 2010096000 | Quartz injector 1.0mm radial torch 1/pk |
| 2010096400 | Concentric glass nebulizer, SeaSpray 1/p |
| 2010097600 | Concentric glass nebulizer, Slurry, 1/p |
| 2010097700 | Concentric glass nebulizer, Slurry, Lib |
| 2010101700 | Ceramic injector 2.4mm Demount torch 1/p |
| 2010101800 | Quartz injector 1.8mm Semi-demount 1/pk |
| 2010104600 | Torch Hi-solids+Ext, axial, 2.4mm id inj |
| 2010104700 | Torch one piece, axial 0.8mm id injector |
| 2010104800 | Torch one piece, axial 1.4mm id injector |
| 2010106800 | Concentric glass nebulizer, Conikal, 1/p |
| 2010117400 | Torch annealed, radial 0.8mm id injector |
| 2010117500 | Torch annealed, radial 1.4mm id injector |
| 2010120300 | Outer tube, quartz, axial hi solid, 1/pk |
| 2010122400 | Torch sheath gas hi-TDS axial 2.4mm inj |
| 2010126900 | Nebulizer OneNeb inert concentric ICP |
| 2100003100 | Upr TSD Insulator 17310 TSD |
| 2100003200 | Lower FID Det Insulator 17311 |
| 210125300 | Variable pathlength rect cell holder |
| 210126800 | SPS5 sample rack 12 x 150mL vessels 1/pk |
| 210126900 | SPS5 sample rack 6 x 500mL vessels 1/pk |
| 210127000 | Rinse vessel SPS-5 autosampler, 900 mL |
| 210127100 | SPS5 sample rack 35 x 25mm od tubes 1/pk |
| 210127200 | SPS5 sample rack 60 x 19mm od tubes 1/pk |
| 210127300 | SPS5 sample rack 100x13mm od tubes 1/pk |
| 210138000 | SPS-5 sample probe 1.0mm id bung fitting |
| 210138100 | SPS-5 sample probe 1.6mm id bung fitting |
| 210148600 | SPS-5 sample probe 1.0mm id scrw fitting |
| 210148700 | SPS-5 sample probe 2.0mm id scrw fitting |
| 210163190 | Ext sample compartment Cary 50/60, 1/pk |
| 210164000 | Burner, air-acetylene, Mark 7, 1/pk |
| 210164100 | Burner nitrous oxide-acet., Mark 7, 1/pk |
| 210181800 | Flow Cell 9 x 0, Inert (Analytical) |
| 210181900 | Flow Cell 9x1mm, Inert (prep) |
| 210182000 | Flow Cell 4x0.15, Inert (sur prep.) |
| 210182100 | HPLC flow cell, 4 x 0, microbore, 1/pk |
| 210229800 | Assy source single NIR w/filters, 1/pk |
| 2170928100 | SPRING, COMPRESS., 0.088OD, 0.012WD,.75 |
| 2302532140 | M5 Union, Brass |
| 2302533140 | M6 Union, Brass |
| 230-2533141-EHS | Union F6MB-F5M |
| 2304533140 | Tee, Brass |
| 2307230001 | Union, zero dead volume, deactivated |
| 2307232901 | Union, for use with the G1888A Headspace |
| 2307601004 | Tubing Assy, 6-port valve-solenoid valve |
| 2307833901 | Bulkhead Fitting, Stainless Steel |
| 2321700003 | Sample loop, 1- ml, deactivated |
| 2321700004 | Sample loop, deactivated, 3mL |
| 2322590004 | Needle, Headspace transfer line 0.5mm OD |
| 2322590005 | Needle, Headspace Transfer Line 0.7mm OD |
| 2322700011 | Sample probe, deactivated |
| 232-2790010-EHS | Needle assembly vial probe,nickel |
| 232-2790012-EHS | Needle assembly vial probe,deactivated |
| 2410020500 | Nebulizer capillary tubing, r m |
| 2410023800 | Silicon tubg,3/16 in.IDx5/16 in.OD/m |
| 2410067590 | Injector alumina semi-dem torch 1.8mm id |
| 2710100200 | Filter cartridge,oil mist elimin, 2/pk |
| 2718038700 | STAINLESS STEEL FILTER |
| 2735000500 | Oil mist eliminator, 1/pk |
| 2740236100 | O-RING,.987 I.D. |
| 2740253600 | O-RING, VITON, .725 ID, SMALL |
| 2740292400 | O-Ring, silicone 0.53 inch ID, PFPD |
| 2740928202 | O-ring, McDowell 2-112-S0604-70, 30/pk |
| 2820006000 | FTG,Vacuum Seal |
| 2820043800 | FITTING, VACUUM RING |
| 300-301-HSP | Tray adaptor, 10ml vial 25/PK |
| 301-013-HSP | Stainless Steel Needle |
| 301-015-HSP | Needle for transfer line .08 od Nickel |
| 301-016-HSP | Needle for transfer line .05od Nickel |
| 301-162-HSP | Tubing, Regulator carrier, out |
| 301-164-HSP | Tube carrier line valve SS |
| 301-165-HSP | Tube, Regulator carrier |
| 301-168-HSP | Tube T sampling valve |
| 301-170-HSP | Tube vent stainless steel |
| 301-205-HSP | Strain relief septum nut |
| 301-212-HSP | Tube, needle-6 port valve,Siltek |
| 301-220-HSP | Needle Assembly, Siltek |
| 3150-0404 | Element, filter 7um |
| 3150-0417 | Fly ash filter, 5921/G2350 |
| 3150-0602 | CO2 Cryo in-line filter |
| 3150-0617 | .5 micron water filter element |
| 3150-0619 | Air filter |
| 3150-0944 | Glass filter, solvent inlet, 40um |
| 3162-1056 | Oil mist filter kit for E1M18/E2M28 |
| 3162-1057 | Oil Drain Kit for Mist Filter |
| 321-002-HSP | Restrictor, Stainless Steel |
| 321-055-HSP | Sampling Loop 1cc, Nickel |
| 321-056-HSP | Sampling Loop 3cc, Nickel |
| 325-019-HSP | Washer, Nylon, 4.8 x 8.0 x 0.5mm |
| 325-024-HSP | Bulkhead fitting kit |
| 325-045-HSP | Zero Dead Volume Union |
| 325-062-HSP | Union, FF, 6MB |
| 325-132-HSP | Union Tee, 6MB-5 |
| 325-185-HSP | Union Tee, Stainless Steel |
| 325-455-HSP | Nut, Stainless Steel, 5mm |
| 35900-60570 | Cable, 5880 signal |
| 35900-60610 | Cable 5890 signal |
| 35900-60630 | Cable,Gen Pur Signal |
| 35900-60640 | CABLE, PINS SIGNAL |
| 35900-60670 | Cable Gen Pur Remote |
| 35900-60700 | Cable, 5890 Remote |
| 35900-60750 | Cable 1046 signal |
| 35900-60800 | Remote Control APG H-Cable |
| 35900-60900 | Analog Cbl Connect35900B/C/D and 3394/95 |
| 35900-60910 | Analog Cbl Connect35900B/C/D and 3394/95 |
| 35900-60920 | Remote Start/Stop Cable 3590B/C/D/E |
| 35900-60970 | 5890/7673 remote Y-cable |
| 35900-60980 | Remote Y-cable for use with 5890/7673 |
| 3610007300 | Pre-optcs cone-Vista/700-ES axial ICPOES |
| 3610010100 | Switching valve for SVS, 4-port. 1/pk |
| 3610017300 | Valve,check cartridge in,1/pk |
| 3610017400 | Valve,check,cartridge out,8101005,1/pk |
| 3710009200 | TUBE CLR VINYL ID-M10 WALL-1,5 |
| 3710024600 | TUBE NALGENE 0.12 IDX0.062INTK |
| 3710035400 | Outlet drain tubing solvent resistant 1m |
| 3710057500 | ri pump tube,3 bridged grey/grey 6/pk |
| 390526600 | POPT SEAL |
| 390534500 | COMPRESSION SPRING |
| 390596004 | O-Ring, baked, .505 OD, 2-109-S70,100/pk |
| 390607900 | TSD Collector Assy |
| 390882400 | Needle,8100 side hole,5 uL + 10ul,1/pk |
| 391160002 | Methanizer packing 5 g |
| 391895902 | Filter,split line,100pct charcoal,1/ea |
| 391946800 | MIX CELL CHAMBER ASSY |
| 392017401 | ASSY, FILAMENT DISK, LONG |
| 392018800 | Manifold gskt,gold pltd,3.243 in ID,1/p |
| 392019400 | Gasket,gold pltd,filmnt,1.29 in.ID,1/pk |
| 392021800 | Spacer,qurtz,SAT 1-4D,1/pk |
| 392028900 | GC/MS FITTING,VACUUM HOSE, 3/4 IN. |
| 392043700 | Ion Trap Filament disk assy,1/pk |
| 392049000 | Electron multiplier assy,1/pk |
| 392372031 | Replacement Methanizer Column |
| 392511901 | Assembly,Filter,Nitrogen |
| 392512800 | Photomultiplier Tube, Nitrogen R-5070A |
| 392513800 | Seal, Combustor Support |
| 392514300 | Saphire Window Washer |
| 392514500 | Saphire Window Assembly |
| 392515101 | PFPD Filter Assembly, Sulfur (S) |
| 392515102 | PFPD Filter Assembly, Phosphorus (P) |
| 392515103 | PFPD Filter Assembly, Tin (Sn) |
| 392515105 | PFPD Filter Assembly, Arsenic. |
| 392517100 | Photomultiplier Tube (PFPD) R647-08 |
| 392517600 | Combustor Sulfur (2mm) PFPD, Cleaned |
| 392517700 | Combustor Phosphorus, 3mm, PFPD Cleaned |
| 392517800 | Combustor Holder (2mm) For PFPD |
| 392517901 | Holder, Combustor, 3mm Cleaned |
| 392567301 | CP3800,SAMPLE INTRO DEVICE CABLE |
| 392575001 | Column SCALE 3800/3900 GC |
| 392585291 | Adapter TCD/DEFC Capillary Make-Up |
| 392590004 | GENIE 170 MEMBRANES-STANDARD PACK OF 5 |
| 392590005 | GENIE 101 MEMBRANES-BTU, PACK OF 5 |
| 392597501 | Assy, INJ. Nut, 1177 |
| 392602810 | Lamp assembly 9040, 1/pk |
| 392604902 | Needle 8200,thru hole,std br,10 uL,1/pk |
| 392607804 | BUFFER TUBING 500UL |
| 392607810 | SYRINGE 250 UL, LUERLOCK 4400.250 |
| 392607908 | SYRINGE VALVE |
| 392607912 | Liquid Sampling Needle Assembly (1) |
| 392607963 | PLUNGER REPLACEMENT TIP, 250 UL, 10PK |
| 392611026 | Needle,prep liquid sampling,1/pk |
| 392613109 | FLOW CELL, 12UI CELL ONLY, PS363 FL DET |
| 393001001 | ANALYZER FLANGE ASSEMBLY |
| 393002401 | RESTRICTOR, LIQUID CI |
| 393002601 | COVER,LIQUID CI RESERVOIR |
| 393010904 | VITON O-RING CLEAN 0.112 |
| 393010905 | VITON O-RING CLEAN 1.24 |
| 393010908 | VITON O-RING CLEAN 0.487 |
| 393010918 | QUAD-RING, XFERLINE, 1.112 ID |
| 393010920 | QUAD-RING,XFERLINE TO MAN.,1.925 ID |
| 393010924 | QUAD-RING, TOP FLANGE, 7.484 ID |
| 393031301 | ASSY, TRAP HEATER AND CABLE, 120V |
| 393031501 | Electron Multiplier Assembly, 220 GCMS |
| 393053502 | QUARTZ SPACER, SILICA COATED |
| 393055101 | GATE TRAP ASSEMBLY |
| 393055201 | TRAP GATE CONDUCTOR |
| 393059191 | TRANSFER LINE TIP |
| 393060191 | Ion Trap Filament Disk Assy With Wires |
| 393060501 | SPRING GOLD PLATED, TRAP (ION TRAPS) |
| 393064601 | ELBOW, ROUGHING PUMP |
| 393123001 | ASSY, PWA, ION DETECTION |
| 393126001 | ASSY, PWA, LOWER MANIFOLD |
| 393127001 | ASSY, PWA, UPR MANIFOLD |
| 393131001 | PWA, ION AMPLIFIER |
| 393161001 | ASSY, FILAMENT, 4000/240MS, EXTERNAL |
| 393164493 | ASSY, 4x00, SILCO END CAP W/PLUG, FIELD |
| 393167593 | RF ELECTRODE, 4x00, SILCO, CLEAN, FIELD |
| 393171101 | TIP, TRANSFERLINE, EXTERNAL, CLEANED |
| 393171201 | ASSY, TIP, TRANSFERLINE, INT, CLEANED |
| 393173801 | ASSY, BASE, INT. IONIZATION SOURCE,CLEA |
| 393173901 | ASSY, GATE, INT. ION. SOURCE, CLEAN |
| 393175101 | MULTIPLIER CHANNELTRON, MOD CEM 4755 |
| 393177401 | CI GAS INLET, MANIFOLD |
| 393180801 | SPRING, CONTACT, HEATER, CLEANED |
| 393650701 | 200MLMIN TI PUMP HEAD KIT PISTON WASH |
| 393705201 | Multiplier, electron, channel |
| 393733701 | SPRAY PLATE |
| 393750102 | SKIMMER, 1.7 MM HOLE, 500MS |
| 393750103 | SKIMMER, 0.9 MM hole for 500u Capillary |
| 393753005 | ASSY,CAPILLARY; 600umID |
| 393754401 | ESI NEEDLE W/ BONDED EK TUBING,14in |
| 393754404 | ASSY, vESI NEEDLE W/BONDED EK TUBE |
| 393755401 | SPRAY PLATE SUPPORT |
| 393781401 | ASSY, QUAD ION GUIDE, .109 R0 |
| 393828801 | ASSY, COLUMN SCALE 3X0 |
| 394200301 | ASSY, QUAD ION GUIDE, GOLD GUARD |
| 394958700 | Tube Collector, FID |
| 394966601 | Injector nut w/ cage,1/pk |
| 3980-0672 | Sapphire piston |
| 410105017 | Tubing, Solenoids to 6-Port, Deactivated |
| 410290500 | Mounting bkt inert s/c Liberty ICP, 1/pk |
| 410298400 | Mounting brkt inert SM s/c on radial ICP |
| 42-36-01354 | Plunger seal for PU-2080 |
| 42-36-01358 | Plunger seal for PU-2080 |
| 4710002300 | Syringe 100 uL, for PSD-95/96/97/100 |
| 4710003000 | Syringe 20 mL, for SPS Diluter, 1/pk |
| 4710003100 | Plunger for 100uL syringe for PSD, 1/pk |
| 4710003200 | Syringe 100 uL for PSD 120, 1/pk |
| 5001-3702 | Column holder for u-LC columns |
| 5001-3730 | Mounting, cover sipr |
| 5001-3738 | Rod, Stainless Steel |
| 5001-3743 | Seal, Fit |
| 5021-1831 | OQ/PV Test Capillary 50cm, 0.25 mm id |
| 5021-1870 | Union, cell holder, 89090A Temp Control |
| 5022-1703 | Inner sleeve, use with HMI kit for 7500 |
| 5022-2126 | External/Internal Union 1/16in |
| 5022-2146 | Union Adjustment Tool |
| 5022-2159 | Capillary, SST 2m, 0.12mm id, ferrule |
| 5022-2175 | Piston seal, 2mm |
| 5022-2188 | Seal Prep Flange |
| 5022-2192 | SS filter assy with EK ring, 2 um pore |
| 5022-6503 | EK tubing, 1/32in od, 0.4mm id, 450 mm |
| 5022-6538 | Tray for 27 Epndorf tubes 0.5/1.5/2 mL |
| 5022-6539 | Vial plate for 15 x 6 ml vials |
| 5022-6541 | Maldi Plate Carrier Bruker |
| 5022-6542 | MALDI plate carrier ABI |
| 5022-6543 | MALDI plate carrier Agilent |
| 5022-6546 | Maldi plate carrier Bruker PAC |
| 5023-0208 | Calibration Plate Bruker |
| 5023-0209 | Calibration Plate ABI 192 |
| 5023-0213 | Calibration Plate ABI 10x10 + 20x20 |
| 5023-0214 | Calibration Plate Agilent |
| 5023-0238 | MALDI plate carrier ABI Opti-TOF |
| 5023-0241 | Stator,6-port,micro,uncoated |
| 5023-1803 | Adapter female/male 10-32 to 1/4-28 SST |
| 5041-2166 | ri pump tubes, Tygon 2.06mm id. 12/pk |
| 5041-2167 | Cassette, fixed pressure |
| 5041-2168 | Glass filter, solvent inlet |
| 5041-2184 | ri pump tubes, Tygon 1.3mm id. 12/pk |
| 5041-2185 | ri pump tubes, Tygon 2.8mm id. 12/pk |
| 5041-2191 | PTFE tubing for 8453 UV, 1.6mm od, 10m |
| 5041-2199 | Ferrules for flow cell 8453 sipr 10/pk |
| 5041-8339 | Glass filter, helium (10-16um pore size) |
| 5042-0901 | O-Ring for vacuum chamber, Viton 1/pk |
| 5042-0922 | Inner sleeve for Carrier/Aux/Blend gas |
| 5042-0923 | Inner sleeve for Plasma gas line 5/pk |
| 5042-1330 | Multicell tubing kit 8453 UV Dissolution |
| 5042-1331 | Valve tubing kit, single bath 8453 Dis. |
| 5042-1332 | Dissolution probes 0.9 mm id for 8453 UV |
| 5042-1333 | Tubing kit for 8453 UV Sipr system |
| 5042-1334 | Sipr/sampler tubing kit for 8453 |
| 5042-1336 | Tubing, heat exchanger,FEP (8453 UV Vis) |
| 5042-1356 | Cassette Variable Pressure |
| 5042-4770 | Tee Joint (1mm) - Sample Introduction |
| 5042-4774 | Gas connector, HMI kit for 7500 series |
| 5042-4775 | Connector for gas line at end cap, 1/pk |
| 5042-4790 | O-Ring for vacuum chamber, Viton 1/pk |
| 5042-8507 | ristaltic pump, silicone tubing |
| 5042-8544 | Plate for 24 tubes with 18mm diameter |
| 5042-8922 | u-Vacuum Degasser tubing kit |
| 5042-8952 | Seal keer,ceramic,hipd |
| 5042-8954 | ChemSure tubing for ristaltic pump |
| 5042-8957 | Fingertight Polyketone fitting 1/16 10pk |
| 5042-9912 | Side and top cover quat pump,valve rail |
| 5042-9918 | Column clip set,eight colors |
| 5060-9055 | Tube, pressure check |
| 5060-9086 | Reference sample kit |
| 5061-3330 | td 1nmol 10/PK |
| 5061-3331 | AA, standard 250PMOL 10/PK |
| 5061-3332 | AA, standard 100PMOL 10/PK |
| 5061-3333 | AA, std 25pmol 10/PK |
| 5061-3334 | AA, std 10pmol 10/PK |
| 5061-3335 | OPA reagent, 10 mg/ml, 6 ampoules |
| 5061-3337 | FMOC reagent 10 ampoules 1ml ea for AAA |
| 5061-3339 | Buffer, Borate 100ml/BT |
| 5061-3378 | Cable, Remote |
| 5061-3388 | Spacer for 1mm cell (8453 + Cary UV) 1/p |
| 5061-3389 | Spacer for 2mm cell (8453 + Cary UV) 1/p |
| 5061-3390 | Spacer for 5mm cell (8453 + Cary UV) 1/p |
| 5061-5853 | Truarc, clip, large 10/PK |
| 5061-5889 | O-Ring 12/PK, Fluoroelastomer, 0.926"ID |
| 5062-2465 | Support Ring |
| 5062-2478 | AA supplement, 1g ea N |
| 5062-2479 | Dithiodiproprionic |
| 5062-2480 | IC phase |
| 5062-2484 | Gaskets wash seal 6/PK |
| 5062-2486 | Velocity regulator 3/PK |
| 5062-2494 | Piston seals 4/PK |
| 5062-8522 | Inlet tubing assembly |
| 5062-8524 | Inorganic anion test mixture |
| 5062-8530 | Cut-off filter 295 nm for 1046A/G1321A |
| 5062-8535 | Waste accessory kit |
| 5062-8544 | Silicone O-Ring 5pk |
| 5062-8562 | AIV Cartridge (400bar) |
| 5062-8587 | Piston Assembly 900ul 1100/1200 |
| 5062-8588 | Column identification RFID-tag 3/PK |
| 5063-5263 | Connector for end cap + carrier gas line |
| 5063-6503 | OQ/PV Standards kit-1 for UV/VIS |
| 5063-6505 | Sieves (SS) for Outlet Valve 10/PK |
| 5063-6506 | Finger Caps 15/PK |
| 5063-6514 | CE Installation Qualification Kit |
| 5063-6515 | CE OQ/PV test kit |
| 5063-6520 | CE OQ/PV chemical kit |
| 5063-6521 | OQ/PV Standards kit-2 for UV-VIS |
| 5063-6522 | Tubing kit for UV-VIS OQ/PV Test 8453 UV |
| 5063-6523 | OQ/PV Hardware kit for 8453 UV-VIS |
| 5063-6526 | Column Clamp 6/PK |
| 5063-6586 | Sapphire Piston |
| 5063-6589 | Plunger seal for 1100/1200 and 1050 2/PK |
| 5063-6597 | Calibration Sample, 1g Glycogen |
| 5063-9153 | Odor element for oil mist filter (E2M18) |
| 5064-8012 | PFA sample tubing 0.5mm id, 1.6mm od, 5m |
| 5064-8013 | PFA sample tubing 0.3mm id, 1.6mm od, 5m |
| 5064-8016 | PTFE sample tubing 0.8mm id, 1.6mm od 5m |
| 5064-8017 | Tee Joint,ISIS |
| 5064-8018 | Cross Joint,ISIS |
| 5064-8019 | Union Joint, ISIS |
| 5064-8020 | PTFE sample tubing 2.0mm id, 3.0mm od 5m |
| 5064-8021 | PTFE Nut for 3 mm od tubing, 10/pk |
| 5064-8022 | Front+back ferrule, tubing od 3mm,10/pk |
| 5064-8023 | PTFE nut for 1.6mm od tubing, ISIS. 10/p |
| 5064-8024 | Front+back ferrule, tubing od 1.6mm,10/p |
| 5064-8026 | Tubing adapter for ri pump tubing 2/pk |
| 5064-8027 | Tubing clamps (small 10/pk + large 5/pk) |
| 5064-8029 | Spiral tubing, 5m. For ISIS-DS |
| 5064-8032 | Wrench for Valve Maintenance,ISIS |
| 5064-8033 | Tag for tubing identification, 10/pk |
| 5064-8078 | Carrier gas line connector 4mm dia tube |
| 5064-8092 | Ar gas clean filter, Semicon App, 1/pk |
| 5064-8249 | Wear Retainer for SFC/SFE 10/PK |
| 5064-8293 | Sapphire piston assy, 2mm |
| 5065-4445 | ristaltic pump for 1100/1200 Series LC |
| 5065-4493 | OQ/PV capillary for prep LC system, SS |
| 5065-4495 | 0.1 - 2.5 ml/min flow capillary kit |
| 5065-4498 | Extended PM kit 1100/1200 autosampler |
| 5065-4499 | Extended PM kit 1100/1050/1200 pumps |
| 5065-9952 | ristalitic pump with ChemSure tubing |
| 5065-9972 | Biocompatibility Kt for 1100/1200 Series |
| 5065-9976 | 10ck of 10 clamps and micro clamps |
| 5065-9978 | 5m silicone Tubing, 1mm ID, 3mm OD |
| 5065-9981 | Solvent Cabinet for 1200 Infinity Series |
| 5067-1510 | Rail assy for Column organizer |
| 5067-1531 | Solvent Cabinet with 4 bottles |
| 5067-1539 | Rotor seal for 5063-6575 valve 8453 Dis. |
| 5067-1551 | 1260 Infinity LC in-line filter, 2.1mm |
| 5067-1553 | 1260 Infinity LC in-line filter, 4.6 mm |
| 5067-1555 | Replacement frits,2 mm,0.2um,10/pk |
| 5067-1557 | Ferrules, SS, 1/32in (0.8mm) ID, 6/pk |
| 5067-1558 | Fittings, SS, M4/4mm 0.8mm ID, 6/pk |
| 5067-1562 | Replacement frits,4.6mm,0.2um, 10/pk |
| 5067-1565 | Solvent mixer,short,200ul |
| 5067-1567 | Side and top cover bin pump,valve rail |
| 5067-1570 | SST Capillary 230 x 0.17 mm m/m p-s/p-s |
| 5067-1571 | SST Capillary 320 x 0.17 mm m/m p-s/p-s |
| 5067-1572 | SST Capillary 150x0.17mm,m/f pre-swaged |
| 5067-1582 | Inline Micro Filter kit, 0.5um, EK |
| 5067-1584 | Fitting with 0.5 um EK frit, 10/pk |
| 5067-1585 | EK fitting for use with 1/32in od 10pk |
| 5067-1595 | Cap Kit 0.12mm G1316C 8/9 vlv short col |
| 5067-1596 | Capillary Kit 0.17mmID, G1316C 8/9 vlv |
| 5067-1597 | Cap Kit 0.12mm G1316C 8/9 vlv long col |
| 5067-4111 | Rotor seal 8/9 selector valve high press |
| 5067-4113 | Stator/rotor seal 8/9 selector valve 400 |
| 5067-4124 | Shutoff valve |
| 5067-4137 | 2pos/6port Valve head 600bar |
| 5067-4144 | 2pos/10port micro Valve head 600bar |
| 5067-4146 | Valve head 6 column selector 600bar |
| 5067-4148 | 2pos/6port BIO valve head |
| 5067-4174 | Valve head 8 pos/ 9 port 1200 Bar |
| 5067-4601 | Solvent selection tubing kit, 4 solvents |
| 5067-4604 | SST Capillary 280x0.12mm ps/ps 1lg 1shnu |
| 5067-4605 | SST Capill. 280x0.12mm ps-ns 2lg 1sh nu |
| 5067-4606 | SST Capill. 400x0.12mm ps-ns 2lg 1sh nu |
| 5067-4607 | SST Capillary 280x0.17mm ps/ps 2long nut |
| 5067-4608 | SST-Capill. 280x0.17mm ps/ps 1lg 1sh nu |
| 5067-4609 | SSTCapillary 500x0.17mm ps-ns 2lg 1sh nu |
| 5067-4621 | Ext light path capillary top seller kit |
| 5067-4633 | Low disrsion capillary kit for G1316C |
| 5067-4634 | Valve rail assembly |
| 5067-4636 | SST Capillary 0.12 mm x 50 mm flexible |
| 5067-4637 | SS-Capillary 30x0.12mm rigid wd ns 1sh |
| 5067-4638 | 1290 Infinity inline filter (0.3um) |
| 5067-4647 | Capillary ST 0.12x340 S/SX |
| 5067-4648 | SST cap. 0.17mm ID 700mm pre-swaged |
| 5067-4649 | Capillary ST 0.12x90 SX/S |
| 5067-4650 | Capillary ST 0.12x150 SL/SX |
| 5067-4651 | Capillary ST 0.12x280 SL/SX |
| 5067-4652 | SST cap. 0.12mm ID 120mm pre-swaged |
| 5067-4653 | Capillary ST 0.12x200 SX/S |
| 5067-4655 | SST cap channel to valve 0.25x250mm |
| 5067-4656 | SST cap valve to press sensor 0.25x80mm |
| 5067-4657 | SST Cap. pump to sampler .17x300mm |
| 5067-4658 | SST Cap. pump to samplier .17x450mm |
| 5067-4659 | SST cap. 0.11mm ID 340mm non-swaged |
| 5067-4660 | Inlet Capillary SST 0.11mm ID 220mm long |
| 5067-4661 | Tubing kit 270mm, 2/pk |
| 5067-4669 | SST cap. 0.11mm ID 600mm non-swaged |
| 5067-4670 | SST cap. 0.17mm ID 600mm pre-swaged |
| 5067-4680 | ALS to Flex Cube tube 600mm 0.5mm ID |
| 5067-4682 | Capillary Kit 0.12mmID G1316C 2/10 vlv |
| 5067-4695 | Sapphire Piston 1220/1260/1290 |
| 5067-4697 | SSV bridge tube |
| 5067-4699 | 1290 Infinity pump service kit |
| 5067-4703 | Flex loop kit, 40 uL |
| 5067-4710 | Flex loop kit, 100 uL |
| 5067-4716 | Outlet valve for flush pump |
| 5067-4717 | Inlet valve for flush pump |
| 5067-4728 | Seal Cap Assembly |
| 5067-4730 | Capillary kit 0.17mmID G1316C 2/10 vlv |
| 5067-4735 | Capillary ST 0.12x130 SV/M |
| 5067-4744 | Capillary ST 0.12x340 SLV/M |
| 5067-4745 | Capillary ST 0.12x500 SLV/M |
| 5067-4746 | Capillary ST 0.12x250 SLV/M |
| 5067-4748 | Capillary ST 0.17x90 S-SX |
| 5067-4783 | Capillary ST 0.075mm x 340mm SV/SLV |
| 5067-4784 | Capillary ST 0.075mm x 220mm SV/SLV |
| 5067-4798 | Replacement Vacuum Chamber |
| 5067-5169 | AB assurance PM kit for G4226A sampler |
| 5067-5170 | AB PM Kit for G4226A sampler |
| 5067-5171 | AB PM Kit for G4220A/B pump |
| 5067-5172 | AB PM Kit for G1310B pump |
| 5067-5173 | AB PM Kit for G1311B pump |
| 5067-5174 | AB PM Kit for G1312B pump |
| 5067-5189 | Low Disrsion Kit 1290 Series |
| 5067-5378 | Inlet Tubing Kit |
| 5067-5380 | Tubing kit for vacuum repl.Chamber |
| 5067-5383 | Vacuum Chamber Replacement Kit - G1379B |
| 5067-5387 | Vacuum Chamber Replacement Kit-G1379A |
| 5067-5388 | Vacuum Tubing Kit for G1379A Degasser |
| 5067-5407 | In-line filter assy for 1290 quat-pump |
| 5067-5416 | Capillary ST 0.17x120mm SL/S |
| 5067-5424 | 20ul Loop 2D-LC |
| 5067-5425 | 40ul Loop 2D-LC |
| 5067-5426 | 80ul Loop 2D-LC |
| 5067-5437 | 60ul Loop 2D-LC |
| 5067-5443 | Inlet tubing |
| 5067-5678 | Piston 1290 Infinity pump, ceramic |
| 5067-5716 | Frit For 1290 Pump Outlet Filter 2/pk |
| 5068-0006 | Stator 2pos/6port 1200Bar |
| 5068-0012 | Rotor 2pos/10port 1200Bar |
| 5068-0031 | 2 ul Capillary Loop (SST) |
| 5068-0032 | 5 ul Capillary Loop (SST) |
| 5068-0033 | 20 ul Capillary Loop (SST) |
| 5068-0034 | 50 ul Capillary Loop (SST) |
| 5068-0035 | 100 ul Capillary Loop (SST) |
| 5068-0051 | 10 ul Capillary Loop (SST) |
| 5068-0097 | Stator, 12pos/13 port Bio valve 200 bar |
| 5068-0099 | Rotor, 2 pos/6 port Bio valve 600 bar |
| 5068-0123 | Rotor 8 pos/9 Port Purge Valve, 1200 bar |
| 5080-8755 | Sample refinery gas 1 liter |
| 5080-8756 | Sample natural gas 2 liters at 60psig |
| 5080-8759 | TOGA Test Gas Sample 16oz (473mL)120psig |
| 5080-8761 | Nickel cat package |
| 5080-8768 | Low Boiling Point Calibration Sample No2 |
| 5080-8769 | Standard sample |
地址：江蘇昆山市新南中路888號純高聯邦國際1幢35
手機： 15312453299
郵箱：xianlu-su@kunshanlab.com
在線客服
電話咨詢